Skip to main content

Write/wipe with zeros to USB drive in Linux

Say, you have a USB thumb drive that you want to donate or give to a friend and you want to ensure that nothings left that might embarrass you, don't worry my friend. As always in the Linux/Unix land there is a tool for that. So to wipe clean a USB drive, do:

dd if=/dev/zero of=/dev/sdc

"/dev/zero" is a special file  that provides a stream of null characters. "/dev/sdc" is the USB thumb drive. dd is a low level system utility used to copy raw data from a source to a destination. Source being a stream of zeros and destination the thumb drive. So, we just wiped clean our storage media. Note that this is applicable to most storage devices, so be careful.


~ts

Comments

Rade said…
Please be careful and do not automatically assume /dev/sdc is "your" usb drive.

You can easily find out what storage devices are attached to the system by running (as super user) fdisk -l

For Ubuntu users, sudo fdisk -l

Better to be safe than sorry :-)
You are exactly right. The above command is [quite] dangerous. Thanks for dropping by.

Popular posts from this blog

Error! Could not locate dkms.conf file install VirtualBox 4.1.8 on Ubuntu 11.10

Tried to update my Ubuntu host today and it did pickup that new version of VirtualBox is available (4.1.8). All other packages installed properly except that VirtualBox installation was complaining about missing dkms.conf file, see error message below. $: sudo /etc/init.d/vboxdrv setup * Stopping VirtualBox kernel modules [ OK ] * Uninstalling old VirtualBox DKMS kernel modules Error! Could not locate dkms.conf file. File: does not exist. [ OK ] * Trying to register the VirtualBox kernel modules using DKMS [ OK ] * Starting VirtualBox kernel modules [ OK ] Though it looks like installation was fine but I am concerned about its effects to VirtualBox functionality. To fix this, do: $: cd /var/lib/dkms/vboxhost $: sudo rm -r 4.1.4 $: sudo /etc/init.d/vboxdrv setup Of course you have to re

The following add-ins could not be started MonoDevelop.GnomePlatform

Installing MonoDevelop in OpenSUSE 12.2 from its repository was very easy. When running it for the first time though I got the message: The following add-ins could not be started: The root of the trace shows MonoDevelop.GnomePlatform,2.8 A quick search shows that MonoDevelop depends on libgnomeui . This should have been part of dependencies when installing the application but well.... Below is the screen shot of the error message. References: http://software.1713.n2.nabble.com/MonoDevelop-and-openSUSE-12-1-td7462957.html [2013/04/09] - Same issue observed in OpenSUSE 12.3 and also the same fix. [2014/11/02] - Same issue observed in OpenSUSE 13.3, mondevelop 3.0.6 and the same fix.